The name tag is worn on the flap of the right breast pocket. Vertically, the name tag will be centered between the top of the button and the top of the pocket, so that distance "A" = distance "B"
Horizontally, the name tag is positioned with its center directly above the center of the button.
The Honor Unit/Honor Unit with Distinction device is centered 1/4 inch above the right pocket.
In the event that the Academic Achievement Insignia is worn, the distance becomes 1/8 inch above the right pocket.
The Shield will be placed 1/8 inch above the HUD or academic wreath.
Enlisted rank will be centered on the shoulder loops…
and up the shoulder loop 5/8 in. from the shoulder seam.
All officers will wear their insignia centered on the shoulder loops of the Class A jacket so that distance "A" = distance "B".
Officers that hold the rank of C/2LT, C/1LT, C/MAJ and C/LTC will place their insignia 5/8 inch from the seam…
and cadets who are C/1LT and C/LTC, will leave a 1/4 inch space between pips or diamonds.
The bottom of the torch disk is placed 1 inch above the notch (letter "A"), and centered on the collar so that distance "B" = distance "C"...
and the bottom of the torch is facing parallel to the inside edge of the collar.
First, locate the notch in the collar. This is base reference point for all placement.
In your mind, picture a reference line that bisects the notch and runs parallel with the line of the collar.
Measure up 5/8 inch from the notch of the collar.
Officers wear the ROTC insignia 5/8 inch above the notch of the collar, with the centerline of the insignia bisecting the notch.
Officers also wear the Torch which is placed 5/8 inch below the notch
Note that the line you mentally pictured running parallel to the inside edge of the color also bisects the centerline of the torch.
The first row of ribbons is centered 1/8 inch above the left pocket. Subsequent ribbons are placed above this base row.
Medals will be worn centered on the wearer's left pocket and placed 1/8 inch below the to seam.
When a cadet wears an odd number of arches (e.g. 1,3, or 5) the arches are positioned as follows: Place the first arch so it is centered between the bottom of the pocket flap and the bottom of the pocket so that distance "A" = distance "B"
The following arches are placed 1/8 inch above and below (respectively) of the center arch. This can be very difficult to measure, as not all arches have the same radius and therefore do not maintain a uniform distance of separation from each other. To solve this, measure from the point where the two arches are closest, and maintain the 1/8 inch separation at this point.
(Special thanks to Tanner Harvey for modeling for these pictures)